Asus WMT-LX User Manual page 19

12)Wake-On-LAN Connector (3-pin WOL)
This connector connects to a LAN card with a Wake-On-LAN output,
such as the HP PCI-L101 Ethernet card (see 7. Appendix). The connec-
tor powers up the system when a wakeup packet or signal is received
through the LAN card.
IMPORTANT:
dem is enabled (see 4.5.1 Power Up Control) and that your system has
an ATX power supply with at least 720mA +5V standby power.
Top:
RJ-45
WMT-LX
WMT-LX Wake-On-LAN Connector
13)USB2/3 Headers (10-1 pin USB2/3)
If the USB Ports on the back panels are inadequate, a USB header is
available for two additional USB ports. Connect the 10-1 pin ribbon
cable from the provided 2-port USB connector set to the midboard 10-1
pin USB header and mount the USB connector set to an open slot on
your chassis.
Top:
RJ-45
WMT-LX
WMT-LX USB Port
+001-023 WMT-LX.p65 copy
This feature requires that Wake On LAN or PCI Mo-
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby
USB23
HP WMT-LX Manual
19
WOL_CON
PME
Ground
2 12
1 11
3/23/01, 9:32 AM
19