Asus WMT-LX User Manual page 17

9) Floppy Disk Drive Connector (34-1pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After
connecting the single end to the board, connect the two plugs on the
other end to the floppy drives. (Pin 5 is removed to prevent inserting
in the wrong orientation when using ribbon cables with pin 5
plugged).
Top:
RJ-45
WMT-LX
WMT-LX Floppy Disk Drive Connector
10) IEEE-1394 Headers (8-pin 1394HEAD2/1394HEAD3)
These headers support an IEEE-1394 serial connector cable set that mounts
to a standard expansion slot in the computer case. 1394-compliant inter-
nal fixed disk drives may also be connected to these headers.
Top:
RJ-45
WMT-LX
WMT-LX IEEE-1394 Headers
+001-023 WMT-LX.p65 copy
FLOPPY
1394HEAD3
HP WMT-LX Manual
17
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
+12V
Ground
Ground
Ground
TPB2-
TPA3+
TPA3- TPB2+
TPB3+ TPA2-
TPB3- TPA2+
Ground Ground
+12V Ground
1394HEAD2
3/23/01, 9:32 AM
17