Acroprint Acrocomm program Programming Manual page 47

6.2.58. TD
Terminal Mode
Format:
where NN is the time in 1/50 of a second the terminal will wait between
transactions when sending transactions in terminal mode. If the clock is set in
terminal mode then 3 operations can be performed with a terminal client in the
computer. These are:
#[id]X1:Extracts the transaction header.
#[id]X2:Extracts the transactions file
#[id]X3:Clears the transaction memory in the terminal.
The terminal mode is used when the terminal is used within an environment
other than Windows, such as UNIX.
6.2.59. TL
Communication Timeout
Format:
where NN is the time in milliseconds the terminal will wait to receive a
communication response when it is communicating with the computer. Default
value 750. This value is used when the connection is made with a very
segmented link, such as Internet or Cellular Modems.
6.2.60. TP
Display Idle-Prompt Time During Idle
Format:
where NN is the time in seconds to display Idle-Prompt time during idle.
6.2.61. UF
Enable use of the FIU (Fingerprint Identification Unit)
Format:
where
L:
AcroComm Programming Manual
TD=NN
TL=NN
TP=NN
UF=L
1 to 5 for using the FIU unit, 1 being the least sensitive and 5
being the most sensitive. N or 0 for not using the FIU unit.
47