Error Codes - Acroprint Acrocomm program Programming Manual

AcroComm Programming Manual

2.3.2. Error Codes

24
for the selected clock. It will look forward and discard all parameters until the
next –S parameter and then it will continue executing the remaining parameters,
if they exist.
ACROCOMM feeds back the following error codes to the operating system:
0 Successful execution.
1 Instruction not executed.
2 Transmission cancelled.
3 Communications error.
4 Transmission aborted.
5 Did not receive response.
6 Connection unsuccessful.
8 Invalid format on commands.
9 Invalid instruction.
10 Not configured for modem.
11 Cannot open file.
13 Execution aborted.