Table of Contents
Advertisement
Parameter
DMA channel
Legacy USB Support
Hard Disk Recovery
Chapter 2
Description
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Enables, disables USB interface devices support.
(Enable for use with a non-USB aware Operating
System such as DOS or UNIX).
Enables or disables Hard Disk to Hard Disk system
Recovery by pressing Fn+F10 key during POST.
Options
DMA3
/DMA1
Disabled
Option:
or Enabled
Disabled
Option:
or Enabled
40
Advertisement
Table of Contents
