Angle Mark - Toshiba BDX4300 Owner's Manual

Remark :
If you choose to upgrade the new FW ,
1.The player will begin to download the
upgrade file and pop up a message to show
the progress.
2. When download is finished, the player will
pop up a message for you, and you can choose
whether to proceed with the upgrading or not.
If you choose to upgrade, the player will begin
to upgrade, and pop up a message to show the
progress. When upgrade is done, the player
will restart.
Attention! Do NOT cut off the power supply
when the firmware is upgrading! If not, the
player might become unworkable.
• [External Memory]
External Memory would be used in BD-
Live
USB flash drive which has at least 1GB
free space to play BD-Live
the Blu-ray Disc
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
2. Follow the instruction on the TV
screen to select {Information}.
Move cursor key to select menu option
then use "OK " key to select
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
[Power Down Mode]
•
Quick Start can reduce the time of Power
On or Power Off significantly. But the
power consumption is higher in Quick Start
mode.
Setting methods:
Setup Menu -> General Setting -> System
-> Power Down Mode -> Normal/Quick
Start (Default as Normal).
Choose Quick Start to go into Quick Start
mode. This mode will only be activated
upon your next standby Off/On.
Generally, in Normal mode, Power On or
Power Off takes longer time and its
standby power consumption is low. In
18
Downloaded from www.Manualslib.com
Downloading upgrade file.Please wait!
Cancel
function. When you plug in the
TM
TM
system would make a
TM
General Setting
Screen Save Off
System
Information
Language Disc Auto Playback On
Playback CEC On
Free size is : 0MB
Disc Auto Upgrade On
Security
Network Load Default More...
Erase
RETURN Return
manuals search engine
Quick Start mode, Power On or Power Off
takes shorter time and its standby power
consumption is higher.
Notes:
- Please be noted that the responding time to
the video output varies for different TV,
Upgrade
therefore the responding time to power on the
TV in Quick Start mode may vary.
- The player will reset to Normal mode
whenever the AC power recovers from a loss.
[Language]
Set up the OSD(On-Screen Display), Menu,
Audio and Subtitle default language for the
player.
Move cursor key to select menu option
then use "OK " key to select
[OSD]
•
Select the default on-screen display
language.
[Menu]
•
function,
Select the default menu language.
[Audio]
•
Select the default audio language.
[Subtitle]
•
Select the default subtitle language.
[Playback]
Move cursor key to select menu option
then use "OK " key to select

[Angle Mark]

•
Some Blu-ray
scenes recorded with multiple angles,
which allow you to enjoy the videos with
your desired angles, therefore the angle
mark is displayed only when the Blu-ray
Disc™/DVD disc is supportable for multi-
angle and Angle Mark is set to ON.
{On} – Display the angle mark.
{Off} – Hide the angle mark.
[PIP Mark]
•
The Picture -In- Picture (PIP) mode display
two pictures on the TV screen at the same
time, the full screen picture is called Main
Window and the small inset window is
called Sub Window. The PIP mark is
displayed when in PIP mode and PIP Mark
General Setting
OSD English
System
Language Menu English
Playback Audio English
Subtitle English
Security
Network
SETUP Exit
General Setting
On
System Angle Mark
Language On
PIP Mark
Playback On
Secondary Audio...
On
Security Last Memory
Network PBC On
Exit
SETUP
discs/DVDs contain the
TM