Table of Contents
Advertisement
Select /Switch off /Switch on
Temperature regulation
The temperature may be regulated by
pressing the key (B) to set the desired
temperature.
By pressing the key B the current tem-
perature setting flashes on the indica-
tor and by pressing the key B again it
is possible to change it.
You confirm the choice of the tempe-
rature either by pressing the key E,
(you will hear the buzzer) or by waiting
for some seconds (you will not hear
the buzzer).
Then the indicator shows the inside
compartment temperature.
The newly selected-temperature must
be reached after 24 hours.
It is not necessary to set the tempera-
ture again after long periods of non
use as the temperature remains
stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond to the setting tempe-
rature. During this time it is possible
that the temperature displayed is
different than the setting temperature.
Switching off
The appliance is shut off by pressing
key (A) for more than 1 second. After
this, a countdown of the temperature
from -3 -2 -1 will be shown.
Ambient Temperature Function
The ambient temperature function is
activated by pressing key D (several
times if necessary) until the corres-
ponding icon appears
9
In this condition the selected tempera-
ture is the ambient temperature.
You must confirm the choice by
pressing key E within a few seconds.
You will hear the buzzer and the icon
will remain lit.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon will flash and then
key E.
Child Lock Function
The Child Lock function is activated by
pressing key D (several times if neces-
sary) until the corresponding icon
appears
You must confirm the choice by pres-
sing key E within a few seconds. You
will hear the buzzer and the icon will
remain lit.
In this condition any possible operation
through the keys does not cause any
change as long as this function is
activated.
It is possible to de-activate the function
at any time by pressing key D until the
corresponding icon flashes and then
key E.
Eco mode Function
The Eco Mode function is activated by
pressing key D (several times if neces-
sary) until the corresponding icon
appears
at -18°C).
You must confirm the choice by pres-
sing key E within a few seconds. You
will hear the buzzer and the icon will
remain lit.
In this condition the chosen tempera-
tures are automatically set ( - 18°C), in
.
the best conditions for storing food.
.
(or setting the temperature
Advertisement
Table of Contents
