Door open acoustic alarm
An acoustic alarm will sound when the
door is left open for around 1,5 minutes.
The door open alarm conditions are
indicated by:
- flashing of the icon
Control Panel (ice dispenser)
F
F. Yellow indicator lamp
Lights up when the locking function
has been activated.
G. Button for locking function.
Used for temporary disconnection of
the locking function and alarm
re-setting.
H. Button for night setting/lighting.
Used for activation/deactivation of the
night setting function and to switch the
lighting and the alarm setting on and
off.
I. Lighting
J. Photo-electric sensor.
Senses prevailing lighting conditions
(must not be covered).
K. Ice feeder
Activated when the paddle in the
feeder is fully depressed.
;
G
K
- sounding of buzzer.
Press the key (E) to stop the acoustic
alarm.
When normal conditions are restored
(door closed):
- the acoustic alarm will stop.
H J
I
Switching the ice machine on and off.
The ice machine is switched on in the
production plant and starts up auto-
matically when the refrigerator is con-
nected to water and power supplies.
To switch off or on the ice machine,
press in the button (D) (several times if
necessary) until the corresponding icon
appears
. You must confirm the
choice by pressing key E within a few
seconds. If the ice machine is
switched off, then the cover supplied
should be fitted over the ice delivery
hole in the door.
Locking function - The ice dispenser
control panel.
The locking function is activated in the
production plant.
12