Chapter 2: Getting Started; Charge The Built-In Battery - Toshiba CAMILEO BW20 User Manual

Chapter 2
Getting Started

Charge the built-in battery

You must use the AC Adaptor (sold separately) or the USB cable to
charge your camcorder before use.
To charge your camcorder through the AC Adaptor (sold
separately) (rated at 5 volts, 2 amps), follow these steps:
1 Plug the AC adaptor into an AC wall socket, and connect its
mini USB plug into the mini USB port on the underside of the
camcorder.
The blinking light indicates that the battery is currently charging;
the light glows continuously once charging is completed.
The full charge time from the AC adaptor is approximately 4 hours.
(Actual charging time will vary, depending on battery condition and
charging conditions.)
16