Preparation; Recharging The Battery; Recharging - Panasonic AG-HMC80PJ Operating Instructions Manual

Preparation

Recharging the battery

Recharging

The battery does not come ready charged when
the camera is purchased. Charge the battery
before use.
It is recommended that you keep one extra battery
as a spare.
1
Connect the power cable to the AC adaptor.
Disconnect the DC cable.
(Battery cannot be charged if DC cable is
connected.)
2
Insert the battery.
Charging lamp [CHARGE]
■
Charging lamp
On: Charging in progress
Off: Charging complete
Flashing: See below
■
If charging lamp is flashing
Check that there is no dirt, dust, or other
substances attached to the connectors on the
battery or AC adaptor, and ensure that the adapter
has been connected correctly.
• If there is dirt or dust on the connectors,
disconnect the power plug from the socket before
cleaning.
• If the charging lamp continues to flash, there
may be a fault with the battery or the AC adaptor.
Please consult with the place of purchase.
4
Insert until fully in place.
Align the battery with the
mark and insert fully.
■
Charging time and available recording time
(Approx.)
Battery Voltage/
model capacity
7. V/
VW-VBG60 640/500
(included) (typ./min.)
mAh
7. V/
VW-VBG6 5800/5400
(optional) (typ./min.)
mAh
• The figures in the table above are guidelines
for use in normal temperature conditions
(temperature 5 °C (77 °F), humidity 60 %).
Charging may take longer in higher or lower
temperatures.
• Charging may take longer if the battery has not
been in use for a long period of time.
• The maximum continuous recording times given
here assume that the camera is recording in DV
mode with no external devices connected.
• Available recording time may vary according to
usage conditions.
• Charging times are based on charging batteries
from an empty state.
Maximum
Charging
continuous
time
recording time
Approx. Approx.
170 min. 85 min.
Approx. Approx.
350 min. 170 min.