(Sd Speed Class 4); (Sd Speed Class 6) - Panasonic AG-AC160A Operating Instructions Manual

(SD speed class 4)

This refers to a class 4 speed standard (SD speed class) for the continuous writing of data between SD
compatible devices and memory cards as designated by the SD standard.
When the use of an SD speed class 4 memory card is recommended for SD-compatible products, this
indicates that stable recording operation can be achieved by using memory cards of class 4 and above.

(SD speed class 6)

This refers to a class 6 speed standard (SD speed class) for the continuous writing of data between SD
compatible devices and memory cards as designated by the SD standard.
When the use of an SD speed class 6 memory card is recommended for SD-compatible products, this
indicates that stable recording operation can be achieved by using memory cards of class 6 and above.
UHS-I compatibility
• UHS-I (Ultra High Speed I) is speed standard for SD memory card. You can use a UHS-I memory
card, which performs as an SD speed class 10 memory card on this camera.
Reminders for handling
• Do not allow dirt, water, or other substances to come into contact with the terminal on the back of the
memory card.
• Do not leave the memory card in the following places:
- Direct sunlight or places of high temperature, such as near heating equipment
- Humid and dusty locations
- Locations with high variations in temperature (where condensation occurs)
- Locations that are subject to static electricity and electromagnetic waves
• Store memory cards in bags or cases after use.
15