Selecting And Performing Operations On Multiple Clips; Selecting Multiple Clips Randomly; Selecting Multiple Clips Consecutively - JVC GY-HM600U Instruction Manual

Hd memory card camera recorder
Hide thumbs Also See for GY-HM600U:
Table of Contents

Advertisement

Selecting and Performing
Operations on Multiple
Clips
Multiple clips can be selected during thumbnail
0
screen or playback screen display.
After selecting multiple clips, perform
0
appending/deleting of OK mark, deleting of clips
using the action selection screen.
After selecting multiple clips, the selections will
0
be canceled by the following operations.
When [Deselect All] in the action menu is
0
selected
When exiting Media mode from the thumbnail
0
screen
When removing the SD card
0
When switching the slot in use
0

Selecting Multiple Clips Randomly

1 Move the cursor to a clip without check mark
and press the [OIS/2] button.
A green check mark appears on the clip.
.
2 Repeat Step 1 to select multiple clips.
Multiple clips can be selected.
0
Press the [LOLUX/3] button while the
0
multiple clips are selected.
Appends OK mark together:
0
[Add OK Mark] B [Selected Clips]
Deletes OK mark together:
0
[Delete OK Mark] B [Selected Clips]
Deletes selected clips together:
0
[Delete Clips] B [Selected Clips]
Memo :
Selecting clips appended with check mark and
0
pressing the [OIS/2] button will cancel the
selection.
If the operation is performed on multiple clips at
0
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (R)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
84

Selecting Multiple Clips Consecutively

1 Press the [LOLUX/3] button.
2 Select "Select Range" in the action selection
screen, and press the Set button (R).
.
3 Move the cursor to the beginning (or end) of the
range for multiple selection, and press the Set
button (R).
4 Move the cursor to the other end of the range.
Magenta check marks appear on the clips
0
within the range. (Including clips that were
already selected.)
Gray check marks appear on selected clips
0
that are outside the range.
1
.
2
3
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gy-hm600e

Table of Contents