Clips Recorded To Sd Cards - JVC GY-HM600U Instruction Manual

Clips Recorded to SD Cards

Folders in the SD Card
Images captured are recorded to the [PRIVATE]
folder inside the SD card.
Images recorded are sorted into the respective
folders according to the menu settings below.
System Setting Format Setting Record Folder
HD
HD
HD AVCHD
SD
Memo :
By formatting (initializing) the SD card from the
0
[Format Media] menu on the camera recorder,
folders required for recording in the current
[System] settings and [QuickTime(MPEG2)]
settings will be generated.
When the [System] settings and
0
[QuickTime(MPEG2)] settings are changed,
folders required for recording in those settings
will be automatically generated.
Caution :
When a clip inside the folder is moved or deleted
0
using the Explorer (Windows) or Finder (Mac),
recording to the SD card may fail if formatting
(initializing) of the card is not performed.
Clip (Recorded Data) and Clip Name
When recording is stopped, the images, audio
0
and accompanying data which are recorded
from start to stop are recorded as one "clip" on
the SD card.
An 8-character clip name is automatically
0
generated for the recorded clip. ("Clip Name
Prefix" + "Clip Number")
When [Format] in the [Main Menu] B
0
[System] B [Record Set] B [Record Format]
menu is set to "AVCHD", the clip name
generated consists only the Clip Number (5-digit
number).
(A P105 [ Format ] )
MOV JVC/CQAV
MP4 JVC/BPAV
AVCHD
MOV JVC/CQAVC
Example: In the case of QuickTime/MP4
A B C G 0 0 01
Clip Number
A number in automatic
ascending order is assigned in
the recording order.
The Clip Number can be reset in
the menu.*
Clip Name Prefix (any four alphanumeric characters)
This is set to "xxxG" ("xxx" denotes the last 3
digits of the serial number) by default.
.
* [Clip Set] B [Reset Clip Number]
(A P107 [ Reset Clip Number ] )
Memo :
Before recording starts, you can set any
0
characters for the clip name prefix by using
[Main Menu]B[System]B[Record Set] menu
B[Clip Set]B[Clip Name Prefix].
(A P107 [ Clip Name Prefix ] )
Changes cannot be made after recording.
0
Recorded Clips
The recorded materials may be split into several
0
files but they can be played back continuously
on the camera recorder.
Clips may be recorded across the two SD cards
0
in card slots A and B depending on the recording
time of the clip.
When copying videos in MP4 file format to a
0
HDD using a PC, it is recommended to use [JVC
ProHD Clip Manager Software], which is found
in the bundled CD-ROM, to maintain continuity.
Caution :
A clip recorded across several cards cannot be
0
played back continuously. Continuous playback
is only possible when the recording is made on
one card.
41