Inserting Or Removing A Memory Card; Getting Started; Initial Settings - Insignia NS-DV720PBL2 Quick Setup Manual

Inserting or removing a memory card

Your camcorder has built-in memory for storing pictures and movies. You can increase the
memory storage by using an SD or SDHC memory card.
NOTE: When a memory card is inserted, your camcorder automatically stores pictures and movies on the memory
card instead of storing them in the internal memory.
To insert a memory card:
• Insert the card into the memory card slot with the arrow on the card pointing toward the slot
To remove an installed memory card:
1 Push in on the memory card. The card pops out slightly.
2 Pull the card out of the slot.
a

Getting started

ess the
NOTE: Remove the clear plastic covering the lens and LCD display of your camcorder before using.
To turn your camcorder on:
Press down and hold the power button for one second.
- OR -
Open the LCD panel.
4 (5 mp)
pictures
Rotate the LCD panel 90° counter-clockwise to view pictures and
with card's
movies.
ctures
To turn your camcorder off :
with
emory
Press down and hold the power button for one second.
e off only)
- OR -
Close the LCD panel.

Initial settings:

When you turn on your camcorder for the fi rst time, your camcorder will be in Simple Mode.
g at current
Simple Mode hides advanced settings and makes your camcorder easier to operate.
Turning on your camcorder for the fi rst time
When you turn on your camcorder for the fi rst time, you will need to choose a menu language
and set the date and time.
ff only)
NS-DV720PBL2_10-0624_QSG_V1_EN.indd 5 NS-DV720PBL2_10-0624_QSG_V1_EN.indd 5
and the card label facing up.
5
7/13/2010 10:03:49 AM 7/13/2010 10:03:49 AM