Table of Contents
Advertisement
Removing the HDD Module/Thermal Module/CPU and DVD-ROM
1.
Remove the two screws of the HDD module, then remove the HDD module from the logic lower.
2.
Unscrew the three screws on the ram door. Then remove the ram door. Next, disconnect the thermal
connector. Then, remove the four screws on the thermal module and remove the thermal module.
3.
Use the CPU fixture and the flat-bladed screw driver to remove the CPU.
4.
Remove the screw on the DVD-ROM bracket and push the DVD-ROM bracket. Then remove this module.
56
Chapter 3
Advertisement
Table of Contents
