Table of Contents
Advertisement
Others
The Others screen contains various parameter settings.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Low Battery Alarm
Panel Close Alarm
System Beep
Sticky Key
Installed O/S
42
Description
Determines whether or not the system will alarm
when the battery power is low.
Determines whether or not the system will alarm
when the display cover is closed.
Determines whether or not the system will emit a
beep on boot up.
Determines whether or not to press Fn together with
function keys ( l , m ...etc.) when you need to adjust
the system functions, such as brightness. If you set
it as enabled, then you do not have to press the
function keys with the Fn key. You can press the Fn
key once then adjust the function. If you select
disabled, you have to press the Fn key with the
function keys together
Sets the operating system in use.
Note: If your O/S is Win NT 4.0, please select the
installed O/S as Win NT 4.0. Otherwise, there may
be some power management problems occur,
becuase Win NT 4.0 employs APC mode.
Options
Enabled
or Disabled
Disabled
or Enabled
Enabled
or Disabled
Enabled
or Disabled
Win98/Me/2K/XP
or
only Win NT4.0
Chapter 2
Advertisement
Table of Contents
