Advertisement
Quick Links
Download this manual
See also:
User Manual
A. Hardware connection:
1.
Turn on the projector.
2.
Attach the Acer WPG. Use the
DVI-to-VGA converter if needed.
Plug one end of the audio cable into
your projector's audio-in jack, and the
other end into the Acer WPG's audio
jack.
Acer WP100
3.
Check the power LED on the left side of
the WPG.
If the LED is off, please plug one end
of the DC-to-DC cable into the power
jack and the other into the projector's
5V DC-out jack (if fitted), or use the 5V
power adapter to supply power.
Once the power is connected, the power
LED should turn red.
4.
After a short time, the WPG's default
screen will be projected, showing brief
software installation instructions.
Quick Guide
Advertisement
Related Manuals for Acer WP100
Summary of Contents for Acer WP100
-
Page 1: Quick Guide
Attach the Acer WPG. Use the DVI-to-VGA converter if needed. Plug one end of the audio cable into your projector’s audio-in jack, and the other end into the Acer WPG’s audio jack. After a short time, the WPG’s default screen will be projected, showing brief... - Page 2 URL for any website. You will automatically be taken to the Once you’re connected, the PC screen Acer WPG welcome page, where you will be projected and the WPG’s power will be able to download the driver. LED will turn green.