Disassembling The Lcd Module - Acer TravelMate Vico Series Service Manual

Disassembling the LCD Module

Remove the six screw rubbers as shown.
1.
Then remove the six screws fastening the LCD bezel.
2.
Detach the LCD bezel from the LCD module carefully.
3.
Remove the four screws holding the LCD.
4.
Detach the two inverter cable connectors from the inverter board.
5.
Detach the bluetooth cable.
6.
Disconnect the CCD cable connector from the CCD board.
7.
Take out the LCD from the LCD panel.
8.
Remove the two screws fastening the left LCD bracket and detach it.
9.
10. Remove the two screws fastening the right LCD bracket and detach it.
11. Disconnect the LCD cable from the LCD.
Chapter 3 63