Setting A Password - Acer Ferrari 3200 Series Service Manual

The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Supervisor Password is
User Password is
HDD Password is
HDD Master ID
Set Supervisor Password
Set User Password
Set HDD Password
Password on Boot
NOTE: When you are prompted to enter a password, you have three tries before the system halts. Don't forget
your password. If you forget your password, you may have to return your notebook computer to your
dealer to reset it.

Setting a Password

Follow these steps as you set the user or the supervisor password:
1. Use the w andy keys to highlight the Set Supervisor Password parameter and press the e key. The
Set Supervisor Password box appears:
38
download service manual and resetter printer at http://printer1.blogspot.com
Description
Shows the setting of the Supervisor password
Shows the setting of the uer password.
This feature is available to user when
Supervisor password is set. Password can be
written on HDD only when Supervisor
password or user password is set and
password on HDD is set to enabled.
Supervisor Password is written to HDD only
when Supervisor password is being set. User
password is written to HDD when both
passwords are set. When both Supervisor and
user password are present, both passwords
can unlock the HDD.
You can use HDD Master ID and MasterID
program together to remove HDD password.
Note: Remove HDD password SOP wll not be
released in service guide because of security
concern. Please request Remove HDD SOP
via tracking system--http://csd.acer.com.tw
Press Enter to set the supervisor password.
When set, this password protects the BIOS
Setup Utility from unauthorized access.
Press Enter to set the user password. When
set, this password protects the BIOS Setup
Utility from unauthorized access.
Note: The user password may not be set
unless the supervisor password is set. If the
user wishes to have only one password,
please set supervisor password.
Press Enter to set the HDD password. When
set, this password protects the internal hard
disk from unauthorized access.
Defines whether a password is required or not
while the events defined in this group
happened. The following sub-options are all
requires the Supervisor password for changes
and should be grayed out if the user password
was used to enter setup.
Option
Clear
or Set
Clear
or Set
Disabled
or Enabled
Disabled
or Enabled
Chapter 2