Advanced
The Advanced menu screen contains parameters involving your hardware devices. It also provides advanced
settings of the system.
Info.
Main
Infrared Port:
Base I/O address:
Interrupt:
DMA channel
Parallel port:
Mode:
Base I/O address:
Interrupt:
DMA channel
F1
Help
↑ ↓
← →
Esc
Exit
The table below describes the parameters in the screen. Settings in boldface are the default and suggested
parameter settings.
Parameter
Infrared Port (FIR)
Parallel Port
Mode
Base I/O address
Interrupt
DMA channel
36
download service manual and resetter printer at http://printer1.blogspot.com
PhoenixBIOS Setup Utility
Advanced
[Enabled]
[2F8]
[IRQ 3]
[DMA1]
[Enabled]
[ECP]
[378]
[IRQ 7]
[DMA3]
Select Item
F5/F6
Select Menu
Enter
Description
Enables, disables or auto detects the infrared port.
Enables, disables or auto detects the parallel port.
Sets the operation mode of the parallel port.
Sets the I/O address of the parallel port. This
parameter is enabled only if Mode is set to ECP or
Bi-directional. This parameter is enabled only if
Mode is set to ECP.
Sets the interrupt request of the parallel port.
Sets a DMA channel for the printer to operate in
ECP mode. This parameter is enabled only if Mode
is set to ECP.
Security
Boot
Item Specific Help
Configure Infrared Port
using options:
[Disable]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when controlled
by OS
Change Values
Select
Sub- Menu
Disabled
Enabled
ECP
, EPP, Normal or Bi-directional
378h
/278h/3BCH
IRQ7
DMA3
Exit
F9
Setup Defaults
F10
Save and Exit
Options
/EnabledDisabled/Auto
/Disabled/Auto
/IRQ5
/DMA1
Chapter 2