Download Print this page

Acer V233H Series Quick Start Manual

Hide thumbs

Advertisement

TABLE OF CONTENTS

Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
How to adjust a setting................................................................14
Troubleshooting............................................................................19

Advertisement

loading

  Also See for Acer V233H Series

  Related Manuals for Acer V233H Series

  Summary of Contents for Acer V233H Series

  • Page 1: Table Of Contents

    TABLE OF CONTENTS Special notes on LCD monitors ..........1 Information for your safety and comfort ........2 Unpacking ................... 5 Attaching/Removing the base ............ 6 Screen position adjustment ............6 Connecting the power cord ............7 Safety precaution ............... 7 Cleaning your monitor ...............
  • Page 2: Special Notes On Lcd Monitors

    SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
  • Page 3: Information For Your Safety And Comfort

    Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. CAUTION for plug as disconnecting device Observe the follwing guidelines when connecting and disconnecting power to the power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet.
  • Page 4: Product Servicing

    Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service person- nel when: •...
  • Page 5: Taking Care Of Your Vision

    Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises. ----------------------------------------------------------------------------------------------------- For more information and help in recycling, please visit the following websites: http://global.acer.com/about/sustainability.htm Worldwide: EN-4...
  • Page 6: Unpacking

    UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. LCD Monitor D-Sub Cable DVI Cable AC Power Cord (Only Dual-Input Model) User Manual Quick Start Guide...
  • Page 7: Attaching/Removing The Base

    Attaching / Removing the Base Install: Remove: Align the base with the stand and Depress the release button as push the base towards the top of indicated first before removing the the monitor. base and follow the arrow direction to remove it. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor...
  • Page 8: Connecting The Power Cord

    CONNECTING THE POWER CORD Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet.
  • Page 9: Power Saving

    Power saving The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. State Light Blue Power Saving Amber Mode The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated.
  • Page 10: Connector Pin Assignment

    CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION Green Logic Ground Blue Monitor Ground Monitor Ground DDC-Serial Data DDC-return H-Sync R-Ground V-Sync G-Ground DDC-Serial Clock B-Ground EN-9...
  • Page 11 24-Pin Color Display Signal Cable Meaning Meaning TMDS Data2- TMDS Data2+ +5V Power TMDS Data 2/4 GND(return for Shield +5V hsync.vsync) Hot Plug Detect TMDS Data0- DDC Clock TMDS Data0+ TMDS Data 0/5 DDC Data Shield TMDS Data1- TMDS Data1+ TMDS Clock Shield TMDS Data 1/3 TMDS Clock+...
  • Page 12: Standard Timing Table

    Standard Timing Table Mode Resolution 640x480 640x480 66.66 VESA 720x400 SVGA 800x600 SVGA 800x600 1024x768 1024x768 VESA 1152x864 WXGA 1280x800 SXGA 1280x1024 WXGA+ 1440x900 UXGA 1920x1080 EN-11...
  • Page 13: Installation

    INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps 1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF. b. Connect the VGA video cable to the computer. Digital Cable (Only Dual-Input Model) a.
  • Page 14: User Controls

    USER CONTROLS Front Panel Controls 1.Power Switch: To turn ON or OFF the power. 2.Power LED: Lights up to indicate the power is turned ON. 3.Empowering / Exit: 1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT OSD menu).
  • Page 15: How To Adjust A Setting

    P/X Series OSD behave When user press “MENU” button on front bezel Acer eColor Management If selected to “Acer eColor Management “ item, will appear the Acer eColor” OSD USER If selected to “USER” item, will appear the Standard OSD I.
  • Page 16: Descriptions For Function Control Leds

    ADJUSTING THE PICTURE The descriptions for function control LEDS Acer eColor Management Main Menu Menu Menu D escription icon icon item User defined. Settings can be fine-tuned to User mode suit any situation Optimal balance of brightness and contrast Text mode prevent eyestrain.
  • Page 17 Main Sub Menu Menu Menu Description Item Icon Icon Adjust the horizontal position. H. Position (available in Analog mode only) Adjust the vertical position. (available V. Position in Analog mode only) Set the color temperature to warm Warm white. Set the color temperature to cool Cool white.
  • Page 18 P241W A Main Sub Menu Menu Menu Description Item Icon Icon H. Position Adjust the horizontal position of the OSD. V. Position Adjust the vertical position of the OSD. OSD Timeout Adjust the OSD timeout. Select input signal from D-Sub or DVI-D or Input Source HDMI Select Wide mode setting for Full screen,...
  • Page 19: Operation Instructions

    Operation instructions Acer eColor Management Step 1: Press “ Key “ to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “<“ or “>” to select the mode Step 3: Press “ Auto Key “ to confirm the mode and run Auto Adjust...
  • Page 20: Troubleshooting

    TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble- shooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
  • Page 21 (DVI Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF · Check the power switch. · Check if AC power cord is properly No Picture connected to the monitor.
  • Page 22 More information refers to http://www.energystar.gov and http://www.energystar.gov/powermangement. As an ENERGY STAR partner, Acer Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Note: The statement above is applicable only to Acer LCD Monitor with...
  • Page 23: Declaration Of Conformity

    -. EN60950-1:2001 + A11:2004 RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment Year to begin affixing CE marking 2008. Oct. 8, 2008 _______________________________ Easy Lai /Manager Date Regulation, Acer Inc. EN-22...
  • Page 24: Federal Communications Commission Declaration Of Conformity

    23”W LCD Monitor Main Model Number: V233Hxxxx Series Model Number: ADFA Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. San Jose, CA 95110 U. S. A. Contact Person: Acer Representative Phone No.: 254-298-4000 Fax No.:...