Advertisement
Operating your headset.
Software Operation.
6. operating the Sound Configuration Software
The Effect tab controls the various sound effect you can use with your USB400 headset.
There are three panels here: Environment Type, Environment Size and Equalizer.
Under Karaoke tab, you can adjust
the microphone effect by selecting
the ON button, and checking the
Microphone Echo option.
Various Karaoke functions can be set
in this section, from adjusting echo
loudness to shifting key. You can
even remove the vocal sound from
a n y s o n g u s i n g t h e Vo c a l
Cancellation option, so you can have
a music-only track.
These functions are applicable to all
audio programs.
connecting the computer
adjusting the headset
multi-status LED indications
installing driver & software
operation, verification& trademarks
There are 4 standard environment
types: bathroom, opera house,
underwater and music lounge.
Aside from these four, you can
choose from a drop-down menu
under More Option for 27 other
e n v i r o n m e n t t y p e s . U n d e r
environment size, there are 3
selection: small, medium & large.
In the equalizer panel you can
a d j u s t l o u d n e s s o f v a r i o u s
frequencies and save such settings.
You can also choose from the 16
preset options for different types of
music.
AU400 - Installation Guide & User Manual
7. verifying successful installation of the driver
For all Windows operating systems mentioned earlier, to verify that the installation of the USB driver is
successful, you check within the Device Manager:
> click on Start, Settings, and Control Panel.
> in control panel, click on the System icon
> open up the System Properties page
> click on the Device Manager tab
(or Hardware tab and then Device Manager button for Windows XP)
> in the Device Manager page, make sure that the View Device by Type is selected.
(*An alternative way to check whether the USB converter is properly installed, make sure the
LED indicator is lit, and press mute, if the light flashes, then the device is properly installed, if not
you should check the details settings as suggested below.)
Checking the drivers within the Device Manager
> scroll down and find the Universal Serial Bus Controllers category
> open it up and see if you can find the USB Composite Device
> if yes close it and look for the Sound Video and Game Controllers category
> open it up and find the USB Sound Device (or Accutone Audio adaptor)
> if you see both these drivers installed, then the installation is successful
> if you cannot locate them, then try to unplug the USB converter, re-boot the machine, and try the
installation again or check the troubleshooting section in this manual.
8. trademark and ownership
D Accutone and the logo design combined are trademarks or registered trademarks of Accutone
Technologies Limited.
D Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the
United States and or other countries.
D IBM and PC/AT are registered trademarks of International Business Machines Corporation.
D Pentium is a trademark or registered trademark of Intel Corporation.
D Apple Computer Inc. has intellectual property rights over "Apple", "Macintosh" and "OSX".
®
®
D In this manual, Microsoft Windows XP Home Edition and Microsoft Windows XP Professional
Edition are referred to as Windows XP , whereas Microsoft 2000 Professional Edition is referred to
®
as Windows 2000, Microsoft Millennium Edition is referred to as Windows Me, and Microsoft
®
Windows 98 Second Edition is referred to as Windows 98 SE.
D All other names of systems and products mentioned are trademarks or registered trademarks of
®
their respective owners. ™ marks and marks are omitted for convenience purposes.
For setup instructions and troubleshooting of AU400 with Apple Macintosh OSX, please refer to our website at
http://www.accutone.com
AU400 - Installation Guide & User Manual
[ inspiring people, inspiring change ]
Verification & Trademarks.
®
®
®
®
Advertisement
