Advertisement
Installing your headset.
Installation.
1. connecting the computer
®
Connect any Accutone telephone headset (monaural
or binaural) to the AU400 via the standardize QD
(quick disconnector). Most Accutone
headset comes with the QD connected, so simply un-
plug the bottom half of your QD cable (with the RJ
modular jack).
quick disconnector
2. adjusting the headset
connecting the computer
adjusting the headset
multi-status LED indications
installing driver & software
operation, verification& trademarks
®
telephone
Connect the USB plug extended from the AU400
to the USB port of your notebook or desktop
computer. The LED indicator will light up indicating
correct connection to the computer.
Make sure you plug in the headset
insert the Installation CD. For more, refer to
section 4.
to USB port
AU400 - Installation Guide & User Manual
3. multi-status LED indications
The LED-indicator on the controller will light up to indicate the various status of the
device. The definitions are listed as below:
Steady WHITE light
Online & Standby
Note that there can be combined-indications as well:
LED indication:
steady WHITE
flashing WHITE
RED with steady WHITE
BLUE with steady WHITE
RED w/ flashing WHITE
BLUE w/ flashing WHITE
BLUE, RED & WHITE together
4. installing driver and software
BEFORE
you
To begin, you should restart your computer, and when your operating system finishes
loading, close all applications and connect the USB400 headset to any USB port in your
computer.
This manual will use Windows XP as demonstration but the steps should be identical for Win98SE, ME or 2000 versions.
Please note that after you plug in the USB400 headset, your operating system
may automatically launch the Hardware Installation Wizard. You should abort
such installation by pressing cancel, instead download the Driver Software at
http://www.accutone.com/frmst_downloads.html for proper performance.
* Apple Macintosh OS X automatically detects the USB device and loads up the driver instantly, no software or
driver installation is required.
AU400 - Installation Guide & User Manual
Flashing WHITE light
Steady RED light
Data Being Received
Speaker Muted
Meaning
device in standby mode ready to receive or transmit voice data.
device is operating, voice data is currently being received.
speakers of the headset are muted, while no voice data is currently being received.
microphone is muted, while no voice data is currently being received.
voice data is being received, users cannot hear anything because speakers are muted.
users should be able to hear voice data coming in, but microphone is muted.
both microphone and speakers are muted, meanwhile no voice data is being received.
[ inspiring people, inspiring change ]
LED - Indication.
Steady BLUE light
Microphone Muted
Advertisement
