Advertisement
Operating your headset.
Software Operation.
5. operating the sound configuration software
The AU400 USB adaptor is equipped with a Sound Configuation software for sound
adjustments. You can open the program by simply double clicking on the orange
Accutone icon in the icon tray, as shown in section 4 of this manual.
When selected Xear 3D as your
DSP mode, you can experience the
7.1 3D-surround effect even with
your headset. Choose headset as
your Output Device, turn on Xear
3D, and click the rotating icon
under the 7.1 Virtual Speaker
Shifter during your favorite audio
applications.
connecting the computer
adjusting the headset
multi-status LED indications
installing driver & software
operation, verification& trademarks
In Main Setting tab, you can choose
your output device from headset to
desktop speakers.
AU400 is also equipped to be used
for digital entertainment programs
like surround sound movie viewing
and gaming.
When connected to a desktop
speaker, AU400 can simulate 7.1
surround sound using Xear 3D
technology.
Simply select your application here.
You can also choose to use S/PDIF output
when connected to other digital audio devices.
AU400 - Installation Guide & User Manual
6. operating the Sound Configuration Software
In Mixer tab, the top panel is the
Playback Volume Control, and the
bottom panel is the Recording
Volume Control.
In Playback Volume Control, you
can adjust the main volume and
balance by adjusting the knob.
Other volume controls includes
Wave, SW Synth., CD Player and
Microphone realtime playback.
Microphone realtime playback adjusts the feedback volume of the microphone to
yourself. The small hammer icon next to the microphone volume control opens up the
microphone advanced adjustments. You can choose to turn on the microphone
playback mute or microphone boost function.
Please note that in muting function inside the Playback Volume Control -
advanced microphone adjustments ONLY mute the volume of the microphone
going to the speaker of the headset, the user on the other end can still hear you.
In Recording Volume Control, you can choose the Stereo Mix volume
control and the Microphone transmit/record volume control. In this
microphone control, you are adjusting the actual outgoing volume. Again,
the hammer icon opens up the advanced setting which include mute and
microphone boost.
AU400 - Installation Guide & User Manual
[ inspiring people, inspiring change ]
Software Operation.
Advertisement
