Samsung SL-M2875FD User Manual page 222

Setting up the fax address book
You can set up speed number with the fax numbers you use frequently via
SyncThru™ Web Service and then easily and quickly enter fax numbers by
entering the location numbers assigned to them in address book.
3
Registering a speed dial number
1 Select (fax) > (Address Book) > New & Edit > Speed Dial on
the control panel.
Enter a speed dial number and press OK.
2
If an entry is already stored in the number you choose, the display shows the
message to allow you to change it. To start over with another speed dial
number, press (Back).
3 Enter the name you want and press OK.
4 Enter the fax number you want and press OK.
5 Press the (Stop/Clear) button to return to ready mode.
4
Using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number at which you stored the number you want.
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button on the number keypad for more than 2
seconds.
• For a two- or three-digit speed dial number, press the first digit button(s)
and then hold down the last digit button for more than 2 seconds.
• You can print the address book list by selecting
(Address Book) >
5
Editing speed dial numbers
1 Select (fax) > (Address Book) > New & Edit > Speed Dial on
the control panel.
Enter the speed dial number you want to edit and press OK.
2
Change the name and press OK.
3
4 Change the fax number and press OK.
(fax) >
Print.
4. Special Features
84