Table of Contents
Advertisement
Energy Saving Tips
• Do not install the appliance near cookers, radiators or other sources of
continuous warmth. High ambient temperatures cause longer, more fre-
quent operation of the compressor.
• Ensure sufficient air circulation at the appliance base and at the back wall
of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to cool
first.
• Do not leave the door open any longer than necessary.
• Do not set temperature any colder than necessary.
• Put frozen food in the fridge to defrost. The cold in the frozen food will
then be used to cool the fridge.
Accumulation of dust on the condenser increases energy consumption. For
this reason carefully clean the condenser at the back of the appliance once
a year with a soft brush or a vacuum cleaner. Ensure the appliance is
switched off.
Something Not Working
If the appliance is not functioning correctly, please carry out the fol-
lowing checks before contacting your local AEG Service Force Centre.
Warning!
Repairs should only be carried out by qualified service engineers. Repairs
carried out by inexperienced persons may cause injury or serious malfunc-
tioning.
Symptom
Appliance does not work.
Appliance cools too much.
14
Possible Cause
Appliance is not switched on
Mains plug is not plugged in or
is loose.
Fuse has blown or is defective. Check fuse, replace if necessary.
Socket is defective.
Temperature is set too cold.
Remedy
Switch on the appliance.
Insert mains plug.
Mains malfunctions are to be
corrected by an electrician.
Turn the temperature regulator
to a warmer setting.
Hide quick links:
Advertisement
Table of Contents
