System Messages; System Error Messages - Dell PowerVault DL2300 Owner's Manual

System Messages

System Error Messages

System messages appear on the monitor to notify you of a possible problem with the system. These messages refer to
events recorded in the System Event Log (SEL). For information on the SEL and configuring system management settings,
see the systems management software documentation.
NOTE: If you receive a system message not listed here, check the documentation of the application that was
running when the message was displayed or the operating system's documentation for an explanation of the
message and recommended action.
NOTE: In some messages, a particular system component is identified by name ("<name>") component number
("<number>"), or location ("bay").
Error Code Message Information
AMP0302
Message
Details
Action
AMP0303
Message
Details
Action
ASR0000
Message
Details
name > current is greater than the upper warning
The system board <
threshold.
name > current is outside of the optimum range.
System board <
1. Review system power policy.
2. Check system logs for power related failures.
3. Review system configuration changes.
4. If the issue persists, see
name > current is greater than the upper critical
The system board <
threshold.
name > current is outside of the optimum range.
System board <
1. Review system power policy.
2. Check system logs for power related failures.
3. Review system configuration changes.
4. If the issue persists, see
The watchdog timer expired.
The operating system or an application failed to communicate within
the time-out period.
Getting Help.
Getting Help.
8
105