Multi-Unit User Operation - Panasonic KX-TCD410NZ Operating Instructions Manual

Handset Registration
The handset supplied with the base unit is already registered. If an optional handset is
purchased, it must be registered. Additional KX-A142NZ handsets are available to
purchase separately. Up to 6 handsets can be registered to a single base unit. Using
additional handsets allows you to have an intercom call while simultaneously conducting
a call to an outside line.
Handset must be registered within 1 minute after pressing PAGE button. If over 1
minute, press then start over again.
Charge the optional handset batteries for 7 hours before initial use.
1
Press MENU.
4 5
Press and hold
(for about 5 seconds) until the green indicator flashes.
Press
If all registered handsets start ringing (Paging),
RIGHT.
press
6
Search/Select desired
base unit number
available to register
the handset.
To exit the operation, press
*1 The factory preset is 0000.
KX-A142NZ Handset: You can see the illustrations for answering system feature on
additional KX-A142NZ handset body, but KX-TCD410NZ does not have an answering
system feature.
Therefore, the answering system does not work even if KX-A142NZ handset
been registered to KX-TCD410NZ.
has
: Handset Registration to a Base Unit
2
Search/Select
"SETTING HS".
to stop paging then start over again.
7
4-digit Base
Unit PIN after
"BS PIN"
displayed.*1
any time.

Multi-unit User Operation

3
Search/Select
"REGISTRATION".
on the Base Unit
8
Press OK.
is
"REGISTER HS"
When a handset is
registered successfully,
a confirmation tone
sounds and "
"
icon lights.
29