Setting The Time; Customizing The Display - Bose Wave Radio CD Owner's Manual

Setting the time

Function
To set the clock - Hold down either Time
The time display changes slowly at first, then faster. Release the clock set button to stop.

Customizing the display

Function
To set AM/PM (12 hour) or Military (24 hour) time - With the system off, hold
down Alarm Setup and press On/Off to switch between AM/PM (12 hour) and Military
(24 hour) time formats.
To select clock or source display mode - With the system on, hold down Alarm
Setup and press either Preset 1 to select clock display or Preset 2 to select source display.
• In clock display mode, the display shows the time while you are listening to the radio, CD,
or AUX.
• In source display mode, the display shows information about the selected source (radio,
CD, or AUX).
• In source display mode, press the Time
To adjust the display brightness - The display dims automatically to medium or low
brightness, as appropriate for low-light room conditions. You can adjust the brightness
setting of the display for both strong light and lowest light environments, but not for the
medium light setting. Turn the system off before setting brightness levels.
• In a strongly lit room, hold down CD Mode
setting between 5 and 9 (it is preset to 8).
• In a barely lit room, hold down CD Mode
setting between 1 and 5 (it is preset to 2).
• If you do not want the system to dim automatically, set both levels to 5.
To turn off the display - With the system off, hold down CD Mode
On/Off to turn off the main display. The display only lights briefly when you press any
button or while the alarm is sounding. Repeat this step to turn the main display back on.
To check the volume setting when it is not displayed - With the system off or
on, hold down Alarm Setup and press Volume L or M to see the current volume setting.
To check the CD time or radio station frequency when it is not displayed -
With the system on, hold down Alarm Setup and press Track/Tune
time or station frequency.
To check the time when it is not displayed - With the system on or off, press the
Time or briefly to see the current time.
or button or press the same one twice.
or to show the time momentarily.
and press Volume L or M to adjust the
and press Volume L or M to adjust the
or
Operating Your Wave
Control panel
Hold
Alarm
Setup
Alarm
Setup
CD Mode
and press
CD Mode
Alarm
Setup
Alarm
to see the CD
Setup
®
radio/CD
Time Time
Alarm 1 Alarm Alarm 2
On/Off Setup On/Off
Presets
1 2 3
4 5 6
Track/Tune
CD Play CD Stop CD Mode
FM AM AUX
Stop
Alarm Volume
Sleep/Snooze
On/Off
Wave Radio/CD
Time Time
Press
and
On/Off
2
1
Time Time
On/Off
Track/Tune
Track/Tune
Track/Tune
Time Time
15