Removing The Chassis Fan - Asus AP120-E1 User Manual

3. Move the drive bay lock toward
the rear panel to secure the drive.
4. Attach the FDD power and signal
cables to the connectors at the
back of the drive.

2.9.2 Removing the chassis fan

To remove the chassis fan:
1. Disconnect the chassis fan cable from the CHA_FAN1 connector on
the motherboard.
2. Locate and remove four chassis
fan screws at the rear panel.
Keep the screws for later use.
Hold the chassis fan with one
hand while removing the
chassis fan screws.
3. Remove the chassis fan, then set
aside.
ASUS AP120-E1 user guide
3
2
3
2-19