Maintenance And Cleaning; Internal Cleaning; External Cleaning; When The Appliance Is Not In Use - Electrolux ECN 2757 Instruction Book

Maintenance and Cleaning

Before any maintenance or cleaning is carried
out you must DISCONNECT the appliance from
the electricity supply

Internal Cleaning

Clean the inside and accessories with warm water and
bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will
damage the surface and leave a strong odour.

External Cleaning

Wash the outer cabinet with warm soapy water.

When the Appliance is not in Use

When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all foods and
clean the appliance, leaving the lid open to prevent
unpleasant smells.
Spare bulbs are available from Expert Appliance Care.
How to change the Bulb
Before changing the bulb, isolate the appliance from the
electricity supply.
Unscrew the bulb, and replace it with a new bulb (max.
15W). Then reconnect the electricity supply. Extra bulbs
are available from your local Zanussi Service Force Centre.
10