Step 1: Choose A Location For Your; Radio; Step 2: Install The Vent Or Dash Mount - Sirius Satellite Radio SST8V1 User Manual

Vehicle Installation

Step 2: Install the Vent or Dash Mount

Depending on your situation, you can either choose to use the Dash Mount or the
Vent Mount.
Installing the Dash Mount:
CAUTION! The adhesive used on the Dash Mount may be difficult
to remove. Do not install this mount on leather surfaces (contact
your vehicle dealer if you are unsure about your dash surface), and
make sure the air temperature is at least 60°F (15°C) during
installation. If it's not at least 60°F, turn on the heater in your
vehicle to bring the temperature up to 60°F.
1 Locate a flat surface for the Dash Mount. Make sure there is ample room
for the PowerConnect Vehicle Dock and Starmate 8 when installed.
2 Set the orientation of the Dash
Mount before adhering it. Loosen
the knob and adjust the adhesive
foot for the location you selected in

"Step 1: Choose a Location for Your

Radio" on page 14:
• Option 1 & Option 3 should be
oriented as I.
• Option 2 should be oriented as II.
3 Attach the Dash Mount to the PowerConnect
Vehicle Dock using the provided screws.
4 Clean the surface with the alcohol
preparation pad and let it dry thoroughly.
16
I
II