Connecting To The Tv; Inserting The Batteries (Aaa X 2) - Samsung UN55F6400AF Quick Manual

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must fi rst pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
1. To turn on the TV, point the Smart Touch Control at the remote control receiver of the TV and press the
button. The remote control receiver's location may vary depending on the model.
P
2. A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then attempt
to connect to the Smart Touch Control automatically.

Inserting the Batteries (AAA X 2)

1
1. Slightly lift the battery cover by pulling the strap or using a plastic card (e.g. a credit card). Next, pull on
the cover's notch with a fi ngernail to remove the cover completely.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
3. Align the battery cover with the back of the remote control, and then press down along the edges until
it is completely attached to the remote control.
Reconnecting the Smart Touch Control
If you need to reestablish the connection between the TV and the Smart Touch Control, press the pairing
button at the back of the Smart Touch Control, pointing at the remote control sensor of the TV.
The pairing button can be accessed by removing the Smart Touch Control's battery cover. Pressing the
pairing button automatically reestablishes the connection between the Smart Touch Control and the TV.
<Attempting to connect and completion icons>
2
<The Smart Touch Control's pairing button>
English - 6
3