Operating And Indicator Panel; Starting Up And Temperature Regulation - AEG SANTO C 9 18 44-5 i User Manual

Operating and Indicator Panel

A. Light button
B. Pilot light fast-freeze
C. Fast freeze button
D. Temperature control knob and ON/OFF switch
The temperature control knob (D), which is also the appliance's On-/Off
switch.
The yellow pilot light (B) comes on when the fast freezing button (C) has
been operated. The refrigerating unit then operates continuously.
Important note: if you operate the fast-freeze switch or adjust the tempe-
rature control knob, the motor might not start immediately. This does not
mean that your appliance has a fault.

Starting Up and Temperature Regulation

Wash the inside of the appliance with lukewarm water with a little bicar-
bonate of soda added (5ml to 0,5 litre of water). Do not use soap or deter-
gent as the smell may linger. Dry the appliance thoroughly.
• Turn the temperature control knob (D) in the direction of "1".
• Operate the fast-freeze button (C). The yellow pilot lamp (B) comes on.
Setting "•": Off.
Setting "1": Hightest temperature, (warmest setting).
Setting "4" (end-stop) : Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the temperature
inside the refrigerator depends on:
-the quantity of food stored
-how often the door is opened
The temperatures in the refrigerator compartment and freezer compart-
ment cannot be independently regulated.
7