7. With the notched end of the SO-DIMM toward the contact edge side of the socket, insert the SO-DIMM
1
into the socket at an angle of about 20 degrees; then press it in firmly
8. Pivot the SO-DIMM downward until it snaps into place.
9. Make sure that the SO-DIMM is firmly fixed in the slot and cannot be moved easily.
10. Put the cover back in place
11. Reinstall the battery. For more information about how to reinstall the battery, refer to "Replacing the
battery" on page 67.
12. Turn the computer over again and reconnect the cables.
74
User Guide
1
and close the cover
2
2
.
. Then tighten the screws
3
.