Installation; Installation Location; The Freezer Needs Ventilation - AEG ARCTIS 818 35 94-01/2 Operating Instructions Manual

Installation

Installation Location

The appliance should be installed in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by
the ambient temperature.
The appliance should therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature
corresponds to the climate classification, for which the appliance is
designed.
The climate classification can be found on the rating plate, which is
located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for
each climate classification:
Climate classification

The freezer needs ventilation

Air is fed under the door through the vent
slots in the base and is exhausted upwards
along the back wall. To ensure proper air
circulation never cover or alter the vent
openings.
Important! If the appliance is installed
under, for example, a hanging cabinet, a
clearance of at least 10 cm between the top
of the appliance and the cabinet above it
must be maintained.
Please check whether, after installing your
appliance and especially after reversing the
door, the door seal fits tightly. A badly fit-
ting door seal may lead to heavy frosting
and a higher power consumption (see also "Something not working").
818 35 94-01/2
SN
N
ST
T
for an ambient temperature of
+10 to +32 °C
+16 to +32 °C
+18 to +38 °C
+18 to +43 °C
9