Table of Contents
Advertisement
User's Manual
Restarting the computer
Certain conditions require that you restart the computer system. For example, if:
You change certain computer settings.
An error occurs and the computer does not respond to your keyboard
commands.
There are two ways to restart the computer system:
1. a. In Windows XP, click start then click Turn off computer. From the
Turn off computer menu select Restart.
b. In Windows 2000, click Start and click Shut Down. From the Shut
Down menu select Restart.
2. Press the power button and hold it down for five seconds. Wait 10 to 15
seconds, then turn the power on again by pressing the power button.
Restoring the preinstalled software
from the Product Recovery CD-ROM
If preinstalled files are damaged, use the Product Recovery CD-ROM to restore
them. To restore the operating system and all preinstalled software, follow the steps
below.
CAUTION: When you reinstall the Windows operating system, the hard
disk will be reformatted and all data will be lost.
1. Load the Product Recovery CD-ROM in the optional optical media drive and
turn off the computer's power.
2. Hold down the F12 key and turn on the power. When In Touch with
Tomorrow TOSHIBA appears, release the F12 key.
3. Use the left or right cursor key to select the CD-ROM icon in the display
menu. For details, refer to the
4. Follow the on-screen instructions.
3-12
Boot Priority
section in Chapter 7, HW Setup.
Advertisement
Table of Contents
