Table of Contents
Advertisement
Standby: When you press Fn + F3, the computer enters Standby. To avoid
entering Standby unexpectedly, a dialog box appears for verification. However, if
you select the check box, it will not appear in the future.
Hibernation: When you press Fn + F4, the computer enters Hibernation. To
avoid entering Hibernation unexpectedly, a dialog box appears for verification.
However, if you select the check box, it will not appear in the future.
Display selection: Press Fn + F5 to change the active display device. When you
press these hot keys, a dialog box appears. Only selectable devices will be dis-
played. Hold down Fn and press F5 again to change the device. When you release
Fn and F5, the selected device will change. If you hold down these hotkeys for
three seconds the selection will return to LCD.
NOTE: If you select TV while an Advanced Port Replicator II is con-
nected to the computer, the computer's LCD will go blank. Press Fn +
F5 for three seconds or press the TV out Button to restore the LCD.
Display Brightness: Pressing Fn + F6 decreases the display brightness in
decrements. When you press these hotkeys, the current setting will be displayed for
two seconds by an icon. You can also change this setting through the Monitor
brightness item of the Power Save Mode window in Power Saver.
Soft keys: Fn key combinations
5-5
Advertisement
Table of Contents
