Printing On Special Media; Install Ink Cartridges; Additional Media Loading Guidelines - Epson Stylus COLOR 480/480SX - Stylus Color 480SX Ink Jet Printer Installation & Operation Manual

Product information guide
Hide thumbs Also See for Stylus COLOR 480/480SX - Stylus Color 480SX Ink Jet Printer:
Table of Contents

Advertisement

7. Read the license agreement and click
Main Menu:
8. Click
Install Printer Driver (parallel only)
printer driver installation screen:
9. Click
. The installer copies the necessary files.
OK
Several windows open on your screen. Wait a few moments,
then continue with the next section to install ink cartridges.

Install Ink Cartridges

Once your software is installed, you see the Setup Utility that
walks you through installing ink cartridges.
Before handling your ink cartridges, be sure to read and follow
these ink cartridge precautions:
Install both ink cartridges, and leave them installed for all
types of printing, or the printer won't work.
Remove the yellow tape seal from the top of the ink
cartridges or you'll permanently damage them. Don't
remove the clear seals on the bottom or ink will leak out.
The ink cartridges packed with your printer are for initial
installation only.
Don't move the ink cartridge holders by hand or you'll
damage the printer.
Don't open an ink cartridge clamp to remove a cartridge
except to replace it with a new one. Once you remove a
cartridge, you can't reuse it, even if it contains ink.
Keep ink cartridges out of the reach of children and do
not drink the ink. If ink gets on your skin, wash the area
thoroughly with soap and water. If ink gets in your eyes,
flush them immediately with water.
1. At the first screen, click
2. Follow the on-screen instructions to install your ink
cartridges.
. You see the
Agree
. You see the
.
OK
3. Now you need to restart your system. Close any open
windows, then click
Click
, click
Start
, and click
the computer
computer.
After restarting, you can install your bonus software
applications and electronic printer manual. See the Start Here
sheet for instructions.

Printing on Special Media

Whether you print on plain paper or special media, you need
to select the Media Type setting according to the guidelines in
the table below.
For this paper name...
Plain paper and envelopes
EPSON Glossy Photo Greeting Cards
(inside surface)
EPSON 360 dpi Ink Jet Paper
EPSON Iron-On Cool Peel Transfer Paper
EPSON High Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Paper
EPSON Photo Quality Ink Jet Cards
EPSON Photo Quality Ink Jet Note Cards
EPSON Photo Quality Self Adhesive
Sheets
EPSON Photo Quality Glossy Paper
EPSON Photo Paper
EPSON Glossy Photo Greeting Cards
(outside surface)
EPSON Photo Quality Glossy Film
EPSON Photo Stickers
EPSON Ink Jet Transparencies
Matte Paper - Heavyweight

Additional Media Loading Guidelines

Don't use the cleaning sheets that may be included with
your special media; they may damage the printer.
Always handle sheets by the edges, and don't touch the
printable surface.
Be sure to load the printable (whiter) side of the media face
up in the sheet feeder.
You can load paper up to the arrow mark on the left edge
guide.
In addition to the
the correct
Paper Size
software.
6/00
EPSON Stylus COLOR 480SX
at the Main Menu to close it.
EXIT
, select
Shut Down
Restart
or
to restart your
OK
Yes
Select this Media Type
setting
Plain paper
360 dpi Ink Jet Paper
Photo Quality Ink Jet Paper
Photo Paper
Photo Quality Glossy Film
Ink Jet Transparencies
Matte Paper - Heavyweight
setting, remember to select
Media Type
for your media in the printer
EPSON Stylus COLOR 480SX
or
Restart
- 5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color 480sx

Table of Contents