Panasonic CF-73ECLTXKM - Toughbook 73 - Pentium M 1.4 GHz Service Manual page 35

13.9 Removing the Bottom
Cabinet.
1. Remove the screw <E> and the screw <F>, and
then remove the Plate 1.
Screw <E>: DXSB2+6FZL
Screw <F>: DFHE5025YA
2. Remove the four screws <G>, and remove the
Plate 2.
Screw <G>: DXSB2+16FNL
3. Disconnect the connector (CN6), and remove the
PC Card Ejector.
4. Remove the four screws <H>, the four screws <I>,
the three screws <J>, the two screws <K>, and the
screw <L> from the Top Cabinet.
Screw <H>: DFHE5035ZA
Screw <I>: DXQT2+G4FCL
Screw <J>: DXSN2+12FZL
Screw <K>: DFHE5025YA
Screw <L>: DXSB2+6FZL
5. Remove the six screws <M> and the screw <N>
from the Bottom Cabinet.
Screw <M>: DXSB2+6FZL
Screw <N>: DFHE5025YA
6. Release the Hook and remove the Bottom
Cabinet.
13.10 Removing the MAIN-PCB and
the VGA-PCB.
1. Remove the four screws <O>, and disconnect the
connector (CN7, CN12).
Screw <O>: DFHE5025YA
2. Remove the MAIN-PCB from the Top Cabinet.
3. Remove the VGA-PCB from the MAIN-PCB.
4. Remove the MODEM and the Lithium Battery from
the MAIN-PCB.
32