13.5 Removing the Center Cover.
1. Release the three Hooks.
2. Open and level the LCD Unit.
3. Release the four Hooks, and remove the Center
Cover.
13.6 Removing the Keyboard and
the LED-PCB.
1
Keyboard
1. Turn over the Keyboard.(1)
2. Remove the Keyboard Plate.
3. Disconnect the connectors (CN802, CN803), and
remove the Keyboard.
LED-PCB
1. Remove the screw <C>.
Screw <C>: DFHE5025YA
2. Disconnect the connector (CN1300), and remove
the LED-PCB.
13.7 Removing the LCD Unit.
1. Disconnect the connectors (CN1001, CN1006,
CN801, MODULE).
2. Remove the four screws <D>, and remove the
LCD Unit.
Screw <D>: DXYN3+J8FZL
13.8 Removing the Palmrest
Cabinet.
1. Release the three Hooks.
2. Disconnect the connector (CN19), and remove the
Palmrest Cabinet.
3. Remove the Bezel.
31