Control Panel; Temperature Setting Buttons - AEG ARCTIS 70310 GS Operating Instructions Manual

Control Panel

1 ON/OFF button and stand-by display (green)
2 Temperature display

3 Temperature setting buttons

4 FROSTMATIC button and FROSTMATIC indicator light (yellow)
5 ALARM OFF button and warning indicator light (red)
(see section: "Control and Information Systems")
Temperature setting buttons
These buttons are connected to the temperature display.
• The temperature display is switched over from the display of the
ACTUAL temperature (Temperature display is illuminated) to the dis-
play of the DESIRED temperature (Temperature display flashes) by
pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).
• Each time one of the two buttons is pressed again the DESIRED tem-
perature is adjusted by 1 °C.
• If neither button is pressed, the temperature display automatically
switches back after a short period (approx. 5 sec.) to the display of
the ACTUAL temperature. The ACTUAL temperature in the appliance is
now adjusted to match the preset DESIRED temperature.
DESIRED temperature means:
The temperature that is required in the appliance, this can be adjusted
to the temperatures shown in the display. The DESIRED temperature is
indicated by flashing numbers.
ACTUAL temperature means:
The temperature display indicates the temperature that is currently
present in the appliance. The ACTUAL temperature is indicated with
illuminated numbers.
818 22 78-00/5
The temperature is adjusted using the
„+" (WARMER) and „-" (COLDER) buttons.
Description of the appliance
15