Table of Contents
Advertisement
♦ When installing the switch on a level surface, attach the rubber feet to the bottom of the
device. The rubber feet cushion the switch, protect the casing from scratches and
prevent it from scratching other surfaces.
Desktop or Shelf Installation
When installing the switch on a desktop or shelf, the rubber feet included with the switch
should first be attached. Attach these cushioning feet on the bottom at each corner of the
device. Allow enough ventilation space between the switch and any other objects in the
vicinity.
Rack Installation
The Switch can be mounted in a standard 19" rack. Use the following diagrams to guide
you.
Fasten the mounting brackets to the Switch using the screws provided. With the brackets
attached securely, you can mount the Switch in a standard rack as shown in Figure 2-3 on
the following page.
Mounting the Switch in a standard 19" rack:
Figure 2-1. Switch installed on a Desktop or Shelf
Figure 2-2. Fasten Mounting Brackets to Switch
DGS-1024T Unmanaged Gigabit Ethernet Switch User's Guide
5
Advertisement
Table of Contents
