Table of Contents
Advertisement
W
-
EB
BASED
Introduction
Login to Web manager
Web-Based User Interface
I
NTRODUCTION
All software functions of the Switch can be managed, configured and monitored via the embedded web-based
(HTML) interface. The Switch can be managed from remote stations anywhere on the network through a standard
browser such as Firefox, Microsoft Internet Explorer, Mozilla, or Netscape. The browser acts as a universal access
tool and can communicate directly with the Switch using the HTTP protocol.
The Web-based management module and the Console program (and Telnet) are different ways to access the same
internal switching software and configure it. Thus, all settings encountered in web-based management are the
same as those found in the console program.
L
W
OGIN TO
EB
To begin managing the Switch, simply run the browser you have installed on your computer and point it to the IP
address you have defined for the device. The URL in the address bar should read something like:
http://123.123.123.123, where the numbers 123 represent the IP address of the Switch.
NOTE: The Factory default IP address for the Switch is 10.90.90.90.
This opens the management module's user authentication window, as seen below.
Enter "admin" in both the User Name and Password fields and click OK. This will open the Web-based user
interface. The Switch management features available in the Web-based manager are explained below.
Web-based Switch Configuration - Introduction
D-Link™ Hardware Installation Guide – DES-3200 Series Switch
S
C
WITCH
ONFIGURATION
M
ANAGER
Figure 5- 1. Enter Network Password dialog
6
Page | 31
Advertisement
Table of Contents
