Table of Contents
Advertisement
24
C
2: I
HAPTER
NSTALLING THE
Package Contents
Choosing a Suitable
Site
S
WITCH
3Com Switch 4050 (3C17708), Switch 4060 (3C17709) or Switch
4070 (3C17707)
CD-ROM
This Guide
Management Quick Reference Guide
Release Notes
Warranty Flyer
Power Cord
2 x securing brackets
8 x screws
4 x rubber feet
The 3Com Switch 40x0 is suited for use in an internal wiring closet, a
network room, or telecommunications room, where they can be
mounted in a standard 19-inch equipment rack, or free-standing.
CAUTION: Ensure that the ventilation holes are not obstructed.
To ensure these products provide optimum performance, high speed fans
are used to provide ventilation. These fans have a high audible output.
When deciding where to position the Switch, ensure that:
Cabling is located away from:
sources of electrical noise such as radios, transmitters and
broadband amplifiers.
power lines and fluorescent lighting fixtures.
The Switch is accessible and cables can be connected easily.
Water or moisture cannot enter the case of the Switch.
Air flow is not restricted around the Switch or through the vents in the
side of the Switch. 3Com recommends that you provide a minimum of
25 mm (1 in.) clearance.
Air temperature around the Switch does not exceed 40 °C (104
If the Switch is installed in a 19-inch rack or closed assembly its local air
temperature may be greater than room ambient temperature.
F).
°
Advertisement
Table of Contents
