Things to
Remember
Transferring Images
Transferring Images by Connecting the Camera to a Computer
Transfer the camera images to the computer.
IMPORTANT
• The instructions in this software manual assume that you have correctly installed
the software. See the Camera User Guide for software installation procedures.
• For details on how to connect the camera to a computer, refer to the Camera
User Guide . Please also refer to
Computer".
• If CameraWindow fails to open when you connect the camera, click the
[CameraWindow] icon in the Dock (the bar at the bottom of the desktop).
1
Connect the camera to the computer with
the supplied interface cable.
2
Turn on the camera power, set it to
playback mode and prepare it to
communicate with the computer.
3
Click [Import Images from
Camera] and then click [Import
Untransferred Images].
Only images that have not yet been
transferred will start to transfer.
Table of Contents
Mastering
the Basics
"Precautions for Connecting the Camera to the
More Advanced
Techniques
CameraWindow (Menu Screen)
Appendices
9