Canon PowerShot S95 Software Manual page 11

Things to
Remember
HINT
Select Images to Import
To transfer only a selection of images from the
camera, click [Import Images from Camera] in
CameraWindow (menu screen), [Select Images
to Import], then select images in the image
transfer screen, and click the
button. For details, refer to "Image Transfer
Screen".
Import All Images
To transfer all images on the camera,
click [Import Images from Camera] in
CameraWindow (menu screen) then, [Import
All Images].
Automatically Transferring Images on
CameraWindow Start-Up
To automatically transfer images when
CameraWindow starts up, click the button
shown on the right in CameraWindow (menu
screen), then click the [Import] button, and
the [Auto Import] tab. Add a checkmark to [Start importing images automatically when this software is
launched.].
Transferring Images Using a Memory Card Reader
ImageBrowser will start when you insert a memory card into the memory card reader, and display the
following window. Use this window to perform the transferring procedures.
Table of Contents
Mastering
the Basics
(Import)
More Advanced
Techniques
Transfers all images.
Allows you to select and transfer images.
Prints images.
Configures the transfer folder and
other settings.
Appendices
11