Caring For The Camera And Battery - Nikon LITETOUCH - Lite Touch 35mm Camera Instruction Manuals

Caring for the Camera and Battery

Keep dry
This product is not waterproof, and may malfunction if immersed in
water or exposed to high levels of humidity. Rusting of the internal
mechanism can cause irreparable damage.
Keep free of salt, sand, and dust
After using your camera at the beach or seaside, wipe off any
sand or salt with a lightly dampened cloth and then dry your
camera thoroughly.
Do not touch the lens with your fingers
Use a blower brush to remove dirt and dust from the lens. To
remove fingerprints or smudges from the lens' surface, use a
soft, clean cotton cloth or lens tissue moistened with ethanol
(alcohol) or lens cleaner.
Handle the slide cover and all moving parts with care
Do not apply force to the lens or flash unit, or to the battery
chamber cover or slide cover. These parts are especially
susceptible to damage.
Do not drop
The product may malfunction if subjected to strong shocks or
vibration.
Keep away from strong magnetic fields
Do not use or store this device in the vicinity of equipment
that generates strong electromagnetic radiation or magnetic
fields. Strong static charges or the magnetic fields produced
by equipment such as radio transmitters could affect the
product's internal circuitry.
Avoid sudden changes in temperature
Sudden changes in temperature, such as occur when entering
or leaving a heated building on a cold day, can cause
condensation inside the device. To prevent condensation, place
the device in a carrying case or a plastic bag before exposing it
to sudden changes in temperature.
4 Getting Started