Shooting
If the main subject is outside the autofocus frame mark:
Use focus lock. (
Lighting/blinking of the green LED
When correct focus has been achieved, the green LED lights up.
20 Basic Operations
Center the autofocus
1
frame mark " " on the
main subject.
p. 24)
Press the shutter release
2
button halfway to focus.
aBlinking indicates the subject is too close.
For correct focus to be achieved, keep
the camera away from the subject for
more than approx. 0.65m.
Note that you may take a picture even
if the camera-to-subject distance is
extremely short (approx. 0.3m).
However, the focus may not be sharp.