Converting Raw Images - Canon Powershot S2 IS - Powershot S2 IS 5MP Digital Camera User Manual

Chapter 1
Table of What is
Contents ImageBrowser?

Converting RAW Images (1/5)

If your camera supports RAW images you can handle higher quality
images.
However, since they are a special type of image, they cannot be opened
by many image editing programs. It is first necessary to convert them
into standard image files.
This section explains conversion procedures.
IMPORTANT
• See your Camera User Guide to check whether your camera
supports RAW images or not.
• Depending upon your camera model, a different program
than the one introduced here may start when you convert
RAW images. If that occurs, refer to the manual for the
software supplied with your camera.
REFERENCE
• RAW images are extremely high-quality images that are not
subject to any deterioration due to compression processing.
ImageBrowser Software User Guide
Chapter 2 Chapter 3
Downloading and What You Can Do with
Printing Images a Camera Connected
Chapter 4 Chapter 5
Viewing Images Organizing Images
Converting RAW Images
1.
Select a RAW image in the Browser Area.
2.
Click the [File] menu and select [RAW Image Processing].
When the window showing the procedures for converting and
adjusting RAW images appears, click [OK].
As shown below and on the following pages, the main
window, navigator window and Image Quality Adjustment
Window will display.
REFERENCE
• If the navigator window does not appear, click the [View] menu
and select [Show Navigator].
■
Main Window
The conversion is conducted in this window.
Thumbnail
Check Mark
Chapter 6
Using Supplementary Appendices
Features
You can use these
buttons to switch
between images and
display modes and set
various conversion
settings, such as the
image rotation.
Preview
Back
106
Index
Next